 |
Air Powered Mixer Pneumatic Driven Mixers with the following features: • 1.8 HP, 3.0 HP, and 5.0 HP • Dual 6” stainless steel impellers • 5/8” diameter stainless steel shaft • Includes one (1) 22 ½” diameter 304 stainless steel drum cover with 3” threaded connection in the center • Ready to use upon receipt • Maximum air consumption of 80 CFM at 90 PSI on 3.0 HP unit • Mixer speed can be adjusted by airflow to achieve 1 RPM to 2500 RPM • Optional gear reducer to increase torque |
 |
Electric Driven Mixer Electric Driven Mixers with the following features: • 1.5 HP, 2.0 HP, 3.0 HP • 110 volt, 220 volt, 460 volt • Dual 6" Mixed-Flow stainless steel impellers • 5/8" diameter stainless steel shaft that is 35" long • Includes one (1) 22 1/2" diameter 304 stainless steel drum cover with 3" threaded connection in the center • Optional Variable Speed Controller and explosion proof motors |
 |
Quick Connect/Removable Drive Unit Mixer Assembly for U.N./D.O.T. Service This system consists of two primary components: a lower shaft/blade unit and an upper power unit complete with detachable lid mounting plate. • Includes gear reducer • Hydraulic, Air & Electric motors available • Quick mount with locking pin • Units can be retrofitted to your existing drive • Upper unit consists of a motor (air, hydraulic or electric), gear box and mounting flange and coupling • Lower unit consists of a mounting plate, bearing housing shaft and two (2) turbine blades |
|
|
Insulating blankets Removable Exterior Insulation Jackets • Constructed of heavy duty vinyl • 1½” thick fiberglass insulation • Easily installed and removed • Opening for drum cover, fill access, 2” bung • R Value = .31 BTUs per inch/hour square foot (F°) |
 |
Lid Mounted Coils Removable Internal Heat Coil installed in drum cover assembly including: • Coils consists of 1” Sch. 10 pipe rolled to a 22” OD with 5½” of pitch • Inlet and outlet are 1” male pipe threads • Drum cover includes 3½” guard and 19” repad • Coils are supported in the bottom with three (3) supports • Specifically designed to allow for start & finish temperature requirements |
 |
Belly Band Heaters Removable Electric Belly Band Heater installed around the circumference of the tank: • 120 or 240 volt • Two 1500 watt elements for 3000 watts total • Adjustable thermostat controls • 6” wide • 6’ HPN cord set • Spring clasp to attach the two sides |
 |
Float Gauge • 2” NPT, 41” tank depth • Galvanized float rod with plastic float and calibration • Aluminum external lock nut |
 |
Float Gauge • 2” NPT, 41” tank depth • All stainless steel wetted parts with glass calibration • Aluminum external lock nut |
 |
Float Gauge • 2” NPT, 41” tank depth • Stainless steel float rod with plastic float and calibration • Aluminum external lock nut |
 |
Tank Stands • Stainless steel or carbon steel construction • Standard clearance heights: 12”, 24”, 36”, 48”, 60” • Custom sizes and colors available |
 |
Containment Basins • Compatible with any IBC type or design • Stainless steel or carbon steel construction • Includes a 1" outlet with plug for cleanout • Top rim reinforced with a 2" inward flange |
 |
Wrench Adapter Wrench Adapter for 3" fusible vent |
 |
Wrench Adapter Wrench Adapter for 2" bung plug |
Contact us now to take advantage of our outstanding accessories for your stainless steel tanks.
Back to IBC Accessories
Mixer Systems Heating/Cooling Level Gauges Containment Basins Other Accessories View All
