Removing the Drum Cover

1. Release the pressure from the stainless steel tote tanks by slowly opening the bung and allowing all pressure to be released.
2. Loosen the 5/8” nut on the clamp ring bolt between the two clamp ring lugs.
3. Remove the 5/8” x 5” long bolt from the clamp ring.
4. Grasp the lugs of the clamp ring and spread the clamp ring enough to disengage it from the drum neck on the stainless steel tote tanks.
5. You can now remove the drum cover, although you may need to use a small amount of force to release the seal that often occurs between the drum cover and the gasket.

Next step: Filling stainless steel tote tanks

Back to main Stainless Steel Totes Handling Tips page.